About the lamps
Each lamp production process is unique (read: you never know what could go wrong), but generally, after the final selection/agreement on the lamp's appearance, the steps are as follows:
- Computer design of the 3D model of a lamp based on the chosen/agreed characteristics
- Preparing the 3D model for printing
- 3D printing of all lamp parts
- Hand-assembling the electronics and other components into a lamp
- Gluing and final finishing touches
- Packaging for delivery
The lamps are designed to be placed on both flat surfaces and walls.
For lamp production, we need 1-2 weeks. If you need the lamp earlier, feel free to contact us, and we will see if we can make an exception at that very moment.
We use high-quality biodegradable PLA filaments for lamp production, which, due to their properties, are also called bioplastics and are considered eco-friendly materials.
Due to the nature of PLA, our lamps are intended for indoor use only (for other uses, we can use different materials by agreement).
The standard dimensions of the name lamps are approximately 20 cm in height, while the width depends on the length of the name and the selected font (around 50 cm).
If you need a lamp with dimensions different from the standard, feel free to contact us.
Lamps are for indoor use only!
Since the lamps are made using 3D printers, due to the nature of the printing process, the lamps may have minor imperfections, but we always strive to minimize or eliminate these.
Each lamp is made exclusively to order and according to the customer’s specifications. Therefore, in accordance with Article 86 of the Consumer Protection Act, returns are not possible.
Each lamp production process is unique (read: you never know what could go wrong), but generally, after the final selection/agreement on the lamp's appearance, the steps are as follows:
- Computer design of the 3D model of a lamp based on the chosen/agreed characteristics
- Preparing the 3D model for printing
- 3D printing of all lamp parts
- Hand-assembling the electronics and other components into a lamp
- Gluing and final finishing touches
- Packaging for delivery
The lamps are designed to be placed on both flat surfaces and walls.
For lamp production, we need 1-2 weeks. If you need the lamp earlier, feel free to contact us, and we will see if we can make an exception at that very moment.
We use high-quality biodegradable PLA filaments for lamp production, which, due to their properties, are also called bioplastics and are considered eco-friendly materials.
Due to the nature of PLA, our lamps are intended for indoor use only (for other uses, we can use different materials by agreement).
The standard dimensions of the name lamps are approximately 20 cm in height, while the width depends on the length of the name and the selected font (around 50 cm).
If you need a lamp with dimensions different from the standard, feel free to contact us.
Lamps are for indoor use only!
Since the lamps are made using 3D printers, due to the nature of the printing process, the lamps may have minor imperfections, but we always strive to minimize or eliminate these.
Each lamp is made exclusively to order and according to the customer’s specifications. Therefore, in accordance with Article 86 of the Consumer Protection Act, returns are not possible.